The Difference Between Stereo Tube Amp and Solid State Amp: Explained

Published October 17, 2020


Which amp produces better sound; is it a tube amp or solid-state amp? What is the difference anyway?

Stereo tube amp

Choosing the best amp is not easy. Firstly, there are a few confusing types of amps to consider. Secondly, there is several conflicting information about amps that are going around online. But what is more confusing is choosing between a tube amp and a solid-state amp.

What is a tube amp and what is a solid-state amp?

A stereo tube amp is a type of electronic device that is responsible for producing audible sound by amplifying tiny sound signals that are produced by musical instruments such as guitar, bass, keyboards, and more.

The tube amplifies small sound waves bigger into the air, causing vibration, which allows everyone to hear the sound.

A solid-state amp, similar to a stereo tube amp, is also an electronic device that converts the electric signal into perceptible sound waves. Although both tube amps and solid-state amps have similarities, these transistors operate differently.

Here are a few differences between a stereo tube amp and a solid-state amp:

  • Overrides

Tube overrides are more responsive and much smoother than the solid-state amp. Also, using high-gain pedals – a chain between the amplifier and guitar – allows you to gain more control.

Solid-state amps, on the other hand, do not pleasantly distort sound when pushed to its limit, unlike tubes.

  • Players

Since solid-state amps produce maximum headroom (loud, clean, and undistorted signal); however, without natural distortion, a solid-state amp can produce brittle sound when used on electric guitars. For this reason, solid-state amps are ideal for keyboard and bassist.

The tube amplifiers, on the other hand, produces more subtle and variances of sounds; for this reason, these tubes are ideal for guitar use. Try to check over here to see a list of well-reviewed top affordable tube amplifier models today.

  • Wattage

Tube amps tend to produce loud sound and can get even louder from its listed wattage specifics compared to solid-state amps of similar spec. For instance, a 50-watt tube can be pushed near to its max with little to no sign of unpleasant distortion compared to a 50-watt solid-state amp that cannot be pushed even further than 50-watt.

  • Construction

Solid-state amps and tube amps have different construction, which is one of the reasons why they both sound different from each other. While the tube amps’ construction influences its performance, where it can still produce pleasant distortion even pushed almost near to its limit, it is more fragile than solid-state amps. Thus, when you carry the amp from one gig to the other, you have to place it carefully inside a strong-based carrier.

  • Price

Tube amps are highly expensive than solid-state amps. For this reason, if you are going to choose a tube amp, you should also consider investing in a carrier to keep it in good working condition.

So, which is the best?

Both solid-state amp and tube amp have their good points. However, when it comes to performance, tube amps are better than solid-state amps.

If you need more proof on this, you may visit the Top Tube Amplifier’s website today.

No Response to “The Difference Between Stereo Tube Amp and Solid State Amp: Explained”

Comments are closed.